Max RPM of an auto gov?

roachie

roachie

Taco Master
Joined
Nov 2, 2007
Messages
11,133
Since I cant do and ag gov, what is the RPM potential of an auto type?

My 13mm has a lightened auto with 5GSK, looks like I need more R's for what I want.

Is 6k possible?



I cant run a hand throttle either.
 
so you can't run an ag gov or a hand throttle (due to rules?), but they allow 6000 rpms and triples? (confused)
 
No, I cant drive an ag gov.

Could probaly pull off the hand throttle though.


Was wondering what the reason was that you never see big r's from a auto gov.
 
i have an auto and a 13mm. i see the 5k range when pullin. have seen over 5200rpm on the dyno too.
 
Thought there would be others wanting to know this. stuff?????

i have an auto and a 13mm. i see the 5k range when pullin. have seen over 5200rpm on the dyno too.
Click to expand...

Who's pump/springs are you running?
 
Run a CDS with DTT custom GSK. Dont know what I hit with the DTT springs, only have the stock tach. Got the CDS 5k to put back in when I want to.
 
teddybear said:
Keep runnin that trap Roachie. We all know nothing will ever come of this :poke:
Click to expand...

STFU, your still not gettin my pump:rules:



Im not sure what the pump will turn, I know it was removed from an SS truck due to not turning enough RPM.

Who sells 6k springs?
 
zstroken said:
Garmon had some 6K, I think haisleys will run 5500 or more.
Click to expand...
Garmon's 6k's turn 4300 in a 180 pump, less in a 215. I haven't turned mine up with CDS springs, but it will easily do 5k now. Haisley 5k springs measured identical to the Garmon 6k.
 
With CDS using there 5K's in a 13mm pump using a cut cam they got to 5500 before fuel break away.

Jim
 
You must log in or register to reply here.
Back
Top