mild 12v engine complete

cumminsforlife

New member
Joined
Jan 23, 2013
Messages
806
Im selling the engine in one of my trucks to fund the other pulling motor. The motor was recently just rebuilt with some stuff done to it. Only has 4k miles when it was rebuilt it had 220k, it had bit of blowby. Im going to keep motor in truck so you can here it run. Its always been a good motor and fun to drive on the street. Here is what is done to it.

Brand new head only 4k miles with new valves and springs/just had valves adjusted/new head gasket
Block was honed and resurfaced.
has all new clevite bearing mains/rods whole 9 yards
complete gasket set for whole motor
crank was in great shape
stock cam
has 5x16 injectors
kdp killer
has stock pistons with new rings
new front cover with new seal
newer lift pump
The pump is set at 18 degree timing/competition dv/no plate/mach rack plug/tork teck/4k springs
Newer vacume pump but leaks lil bit of oil
Has mighty head bolts tourqued to 145lbs. Motor has seen close to 80lbs of boost when twins were on for like 1k miles and
Has s472 on it now that builds around 55lbs

The truck made 650 with the turbo on it now and made 700 with the twins i will look for dyno sheets but it was a long time ago iv driven the truck 4-5k miles over the past 3 years.
Im forgetting things for sure as i remember ill just add to the list. Asking 6000 for the complete motor. Text me for pics or if you wanna take a look at it. 5133075584
 
183303_427869173936936_1661912979_n.jpg


thats not the turbo on it now it was a junk on to see what it would do after rebuild.
 
Back
Top