Need help, no fuel

Skrogan

New member
Joined
Apr 12, 2011
Messages
43
I have a p pump 24v that we just adjusted gov. springs, timing, and put in some 240 injectors. While we were doing timing and we broke the timing pin :badidea: put a new pin in and did timing again. Well now it's getting fuel to the injection pump from the lift pump but no fuel to the fuel lines. Took the pump off and everything moves free and nothing is stuck. We found one peice of the timing pin but not the other. It's a 180 pump with 181 dv's and 4k springs. Can anyone help me out?
 
Have you tried cracking the lines while turning over? Could have air in the line. Also the rest of that pin could be in your oil pan. Id say change oil soon hopefully it finds it's way to the drain plug.
 
Well found the problem last night. Whenyou turned the key on the lift pump would run and spay fuel out but when you started cranking the lift pump would stop running. We re-wired the lift pump and now it works just fine.
 
Back
Top