need some help

cummin95

cummin95

Concrete King/Welder
Joined
Dec 5, 2010
Messages
400
Hey guys i got a new project going that me and a buddy are gonna try to and finish up here soon. Its a 88 ford f150 with a 95 p pump 12valve 2wd. We just finished up the motor mounts and drive line all seems to be going well and now the questions...

On the side of the motor i noticed the vaccum setup my question is are both the canisters needed for just a street strip set up its 2wd no heater and no air or anything?

Another question is as of now the plate has been taken out and a #10 plate added the timing has been set to 17* and the idle has been adjusted. were trying to use this 66 off another truck and im curious what would be need to run it in our setup. Im thinking of course some size injectors? dvs? pump work and a set of springs? just not sure what ones to go with this is the first 12v i have ever been in.

Thanks guys any help is appreciated.
 
oh and the turbo is a schwitzer the exh housing has the numbers 668324 with 115 under it the cover on the wheel has 055J on it also i was told it is a 66 and a little laggy
 
I'll bite but I know nothing.
5x.014's to 5x.016's
Delivery valve of choice maybe some comps, maybe .024's
4ks
I don't know what else. The charger sounds like a lag pig to me.
 
5x.014 or 5x.016, stock dvs, tuned afc, 2095 rack plug, bump timing, 4k's, no plate, good fuel supply to pump. Don't forget about transmission.
 
okay guys thanks i gave up for a bit glad i came back and read thanks for the guidance fellas
 
You must log in or register to reply here.
Back
Top