MADDOG
New member
- Joined
- Apr 23, 2006
- Messages
- 639
Without going into much detail I am going to have to put my truck project on hold due to some family medical expenses. I have a few items that I need to sale ASAP!!! and I will list them below with my asking price. I don't want to give them away so if you are interested please make a resonable offer.
Thanks.
1. Brand new complete 6.7 Cummins crate motor. $7500
2. Brand new Fluidamper for a 6.7 Cummins. $490
3. Good used set of 14mm, H-11 12 valve head studs. $475
4. Custom set of H-11 studs. These fit a 12 valve but require some machine work to the rocker pedestals. These are true 14mm studs that use 11/16 nuts. $550
4. New built 12 valve engine with specs below. $7000
New Storm block ( not a 53) main studs with stiffening plate, and machined for 14mm studs.
2- New Crankshaft (Balanced and cryoed)
3- Rods with HD bolts (shot peened, balanced, and cryoed)
4- Mahle pistons from hasiley's (bowls have been opened to lower comp.ratio, and fly cut for a Buddah power cam, balanced, total seal rings, 14.5:1 compression ratio.
5- HD push rods with common rail tappets, and aluminium tappet cover.
6- 12 valve head with new 60lbs springs intake and exhaust, titanium locks and retainers, new valves, seals. Intake machined off with port work on intake and exhaust. drilled and tapped for custom intake, 14 mm studs haisley fire ring in the deck.
7- New pump gear, cam gear, oil pump, and crank gear
8- New Buddah Power cam.
Duration @ .050 Cam lift Lobe sep.
Int. 198@.050, 376, 105
Exh. 230@.050, 336,
I may have missed some things, but the list should cover the main stuff. The engine is balanced and blue printed, and was built by Zane at Wide Open Performance.
Thanks.
1. Brand new complete 6.7 Cummins crate motor. $7500
2. Brand new Fluidamper for a 6.7 Cummins. $490
3. Good used set of 14mm, H-11 12 valve head studs. $475
4. Custom set of H-11 studs. These fit a 12 valve but require some machine work to the rocker pedestals. These are true 14mm studs that use 11/16 nuts. $550
4. New built 12 valve engine with specs below. $7000
New Storm block ( not a 53) main studs with stiffening plate, and machined for 14mm studs.
2- New Crankshaft (Balanced and cryoed)
3- Rods with HD bolts (shot peened, balanced, and cryoed)
4- Mahle pistons from hasiley's (bowls have been opened to lower comp.ratio, and fly cut for a Buddah power cam, balanced, total seal rings, 14.5:1 compression ratio.
5- HD push rods with common rail tappets, and aluminium tappet cover.
6- 12 valve head with new 60lbs springs intake and exhaust, titanium locks and retainers, new valves, seals. Intake machined off with port work on intake and exhaust. drilled and tapped for custom intake, 14 mm studs haisley fire ring in the deck.
7- New pump gear, cam gear, oil pump, and crank gear
8- New Buddah Power cam.
Duration @ .050 Cam lift Lobe sep.
Int. 198@.050, 376, 105
Exh. 230@.050, 336,
I may have missed some things, but the list should cover the main stuff. The engine is balanced and blue printed, and was built by Zane at Wide Open Performance.
