Nitrous Bottle Install Pics.

[heinzboy]

Can I get some pics of were you have your bottles mounted????????:thankyou2:

 

[_CH_]

put it in the bed with a billet mount

 

[UNBROKEN]

Mine is in the front right corner of the bed....sitting on a BedRug.
Nothing fancy...just nice and simple. I'm gonna switch to an Aerospace Components dual bottle billet mount after the motor swap with 2 15 lbs bottles in the front center of the bed.

How big is your pass through box Toby?
I'm guessing your bed is a bit diferent than ours now.

 

[nummit]

Is this going on the SRT10?

 

[JacktheBear3]

Pull the center section between the bucket seats, use the mentioned billet mounts.....
having your bottle in the front seat is the only way to travel.

Seriously, how often will this bottle be in use?

 

[UNBROKEN]

Just don't put the bottle inside without a blow down tube vented to atmosphere.
Nobody wants to hear the safety side of things...but people die that way.
There was a race in Dallas last year when a guy leaving had a bottle go off in his car. It didn't explode or anything...but it freaked out the driver enough that he bailed out of the car and the passenger died in the ensueing wreck.

 

[Mooring Product]

Just don't put the bottle inside without a blow down tube vented to atmosphere.
Nobody wants to hear the safety side of things...but people die that way.
There was a race in Dallas last year when a guy leaving had a bottle go off in his car. It didn't explode or anything...but it freaked out the driver enough that he bailed out of the car and the passenger died in the ensueing wreck.

He just jumped out of a moving vehicle?

 

[bassn_07]

At what temperature would the safety release valve open up and dump the nitrous bottle? That is what happens when the temperatures get too hot...right?

 

[RacinDuallie]

Is this going on the SRT10?

There's another SRT10 owner here?? who?oke:

 

[nummit]

There's another SRT10 owner here?? who?oke:

Toby just picked one up the other day

 

[joefarmer]

At what temperature would the safety release valve open up and dump the nitrous bottle? That is what happens when the temperatures get too hot...right?

NX bottles have a 3000psi pressure disk in the vent. If it's over 3000psi, it should blow out to release pressure.

brandon.

 

[Mountaineer]

Awesome!! 10 posts and not a pic yet:clap:

 

[Dalpilot]

Put mine in the toolbox, till I removed the toolbox.

 

[heinzboy]

How big is your pass through box Toby?
I'm guessing your bed is a bit diferent than ours now.

Its freaking huge.

Is this going on the SRT10?

Nope, its going on my Dually.

Seriously, how often will this bottle be in use?

Its only going to be used for racing.

There's another SRT10 owner here?? who?oke:

Me.

I take mounting it in the bed is the best way to go for most people??

 

[_CH_]

Its freaking huge.


Its only going to be used for racing.

aka daily LOL

 

[Jff24Gordn]

Here is my bottle mounted.

 

[RacinDuallie]

Me.

Me too- Lemme know if ya need advise on the bombs for it.:evil I got a 04 R/C 6spd. You got the a/t in there? I just sent my headers out for coating, gonna do a new exhaust system to exit both sides before the rear wheels- through lower bedsides.....Corsa muffs/resonators- should sound downright nasty:evil And Caltracs help out a bunch too:evil



Now back on topic- In the bed- And I've seen em under the bed too between frame and bedside.....*nx*

 

[SINNER]

in the bed with cheap azz bracket that came in the kit.

 

[UNBROKEN]

Those brackets look familiar. LOL

 

[rubberfish]

Here is my bottle mounted.

Do they work mounted up on end like that?
I don't want mine in the box and I have a
reg cab too. So not a lot of room for things.