nitrous. jets..

[oklahoma_6speed]

on the jets. what hp will i get out of the jets.. so if i was to put a .43 in. what hp would it be.. or a .63 or a .70.. how would i figure out what hp they are putting out.. is there a place to look to find the numbers that are need...

 

[joefarmer]

A .50 will flow between zero and 100hp. It depends on the amount of fuel available to burn. Start small, .035 or so and see how your truck responds. A larger jet like a .75 or even .100 will need a progressive controller to prevent engine damage.

 

[scott2001]

whats the dangers of spraying nitrous on a diesel i would guess the same as a gas burner

 

[jessmeistertc]

whats the dangers of spraying nitrous on a diesel i would guess the same as a gas burner

nope. cant detonate or really run lean by using to much spray. if u put too much to it, it will just put out the fire. for the most part.

 

[scott2001]

would it help someone that isnt really over fueled other than cooling everthing down, or would the results be like with a gas engine, never seen nos on a diesel other than reading about it. have delt with it on mustangs before

 

[joefarmer]

The problem that I normally run into is excessive back pressure and end up destroying the turbo that way. It can also promote burning fuel in the exhaust tract which leads to melted turbine wheels.

On a truck that's almost clean you'll see a little power gain. To me, the price:benefit ratio isn't worth it unless you have extra fuel to spare.

 

[oklahoma_6speed]

so there is no reall point of the horse power a .50 will make. 0 to 100 is a good span .. so dyno . a surtain jet.. then change out would be about the only way to zero in on the hp a jet will make..the more fuel will up the hp in the jet..rite...
could a person run both water meth and nitrous.. ice cubes...lol... thanks for the help.. guys...