C chope New member Joined Mar 1, 2008 Messages 91 May 2, 2009 #1 after changing the headgasket heater only blows out defrost but not hot,and no ac,any ideas??
Billysgoat The ANTI-BLING! Joined Apr 21, 2006 Messages 10,694 May 2, 2009 #2 Look for vac leaks, check EVERY hose, you unplugged one somewhere.
homewrecker gear jammer Joined Oct 23, 2007 Messages 2,137 May 2, 2009 #3 The main culprit is usually the one vac fitting that tee's at the top of the firewall directly behind the intake horn.
The main culprit is usually the one vac fitting that tee's at the top of the firewall directly behind the intake horn.
C chope New member Joined Mar 1, 2008 Messages 91 May 2, 2009 #4 the line under the VP pump where does that go,[back to the firewall were those to nipples stick out]
C chope New member Joined Mar 1, 2008 Messages 91 May 2, 2009 #5 oh yeah the t was also apart but that did not fix it
S steveo24 New member Joined Apr 21, 2009 Messages 59 May 2, 2009 #6 it's gotta be a line somewhere that you broke or unplugged. Follow that T and see where else it goes, bet you'll find your problem then
it's gotta be a line somewhere that you broke or unplugged. Follow that T and see where else it goes, bet you'll find your problem then
Billysgoat The ANTI-BLING! Joined Apr 21, 2006 Messages 10,694 May 4, 2009 #7 I did the same thing when I yanked the head on my truck, I know this is the culprit, been there, done it several times. Start at the vac pump and trace ALL the lines out.
I did the same thing when I yanked the head on my truck, I know this is the culprit, been there, done it several times. Start at the vac pump and trace ALL the lines out.
dieseldork DAZED&CONFUZED Joined Mar 22, 2007 Messages 133 May 4, 2009 #8 Had the same problem last weekend had the whole dash tore apart and here to find out it was just a vac line pulled loose in the engine compartment.
Had the same problem last weekend had the whole dash tore apart and here to find out it was just a vac line pulled loose in the engine compartment.