NV 5600 With New South Bend Con fe. Clutch

Steven Crouse

Pirate Diesel
Joined
Jan 17, 2009
Messages
111
NV5600 6sp. out of a 2wd '05 Ram 3500. Trans. is in good shape and shifts fine.

Brand new Southbend Con Fe Clutch rated for 550hp 1100ft/lbs.

I broke the splines on my old clutch and southbend sent me a replacement, but i got a deal on a dual disc so this one has to go.

I'll take $2800 for both or $2000 for trans. and $800 for the clutch.

Call 423-227-7145 or 423-421-2644 for more info. Located in Chattanooga, TN
PM with e-mail address if you would like pictures.
 
NV5600 6sp. out of a 2wd '05 Ram 3500. Trans. is in good shape and shifts fine.

Brand new Southbend Con Fe Clutch rated for 550hp 1100ft/lbs.

I broke the splines on my old clutch and southbend sent me a replacement, but i got a deal on a dual disc so this one has to go.

I'll take $2800 for both or $2000 for trans. and $800 for the clutch.

Call 423-227-7145 or 423-421-2644 for more info. Located in Chattanooga, TN
PM with e-mail address if you would like pictures.

so the clutch has never been used?
 
NV5600 6sp. out of a 2wd '05 Ram 3500. Trans. is in good shape and shifts fine.

Brand new Southbend Con Fe Clutch rated for 550hp 1100ft/lbs.

I broke the splines on my old clutch and southbend sent me a replacement, but i got a deal on a dual disc so this one has to go.

I'll take $2800 for both or $2000 for trans. and $800 for the clutch.

Call 423-227-7145 or 423-421-2644 for more info. Located in Chattanooga, TN
PM with e-mail address if you would like pictures.

Here is the info you need..
 
clutch has new upgraded disks and the pressure has been resurfaced and tested by southbend.
 
so you sold a clutch that you got for free from southbend? after you broke yours they were nice enough to send you a new one!!!
 
you can not change just the tail shaft on the nv 5600 to go from 4x2 to 4x4 you have to change the whole main shaft due to the slipper joint for the two wheel drive.
 
Back
Top