oil feed fittings

[jessmeistertc]

need to know what thread size the ports are on top of the oil filter housing. gonna put in AN fittings and make my feed lines for the twins. thanks

 

[bgilbert]

1/4 npt and 1/8 npt.

 

[CSM diesel]

STORM blocks (i.e. two oil drains, metric fittings, etc) Have an 1/8" NPT and a 12mx1.5 straight thread o-ring fitting...

If it is for your '00 in your signature, you have a storm block.

 

[KILLER 'B']

STORM blocks (i.e. two oil drains, metric fittings, etc) Have an 1/8" NPT and a 12mx1.5 straight thread o-ring fitting...

If it is for your '00 in your signature, you have a storm block.

x2..

 

[jessmeistertc]

STORM blocks (i.e. two oil drains, metric fittings, etc) Have an 1/8" NPT and a 12mx1.5 straight thread o-ring fitting...

If it is for your '00 in your signature, you have a storm block.

Russell Performance 670510 - Russell AN to Metric Adapter Fittings SummitRacing.com
will this work or no? can i put an o-ring on this? my truck is not here, so i cant look at it.

 

[Tate]

STORM blocks (i.e. two oil drains, metric fittings, etc) Have an 1/8" NPT and a 12mx1.5 straight thread o-ring fitting...

If it is for your '00 in your signature, you have a storm block.

My 94 12v also has those fittings on top of the oil cooler. I used the turbo feed line off my 94 on my 24v and the 24v on my 98 12v.