oil supply fitting

[zstroken]

Is there an adapter that goes in the storm block to supply the oil for the ppump? Do you get a new line or?

 

[roachie]

What?

 

[zstroken]

The oil supply line on when you Ppump a 24V. The 12V block is NPT and the storms are Metric, Oring. So do you use the same oil line, get an adapter? Or?

 

[flcrawler]

You will need a metric to -4 adapter or a -4 tee.

 

[zstroken]

What size metric?

 

[2141pete]

Dan go back to the 3rd port I believe and 1/8" should go right in. In my block there was a thin bushing between the block and plug. I have a 1/8" to -4 male and a -4 pushlock that the oil line connects with.

 

[flcrawler]

I used a m10x1.0 to -4 fitting in the next hole and the factory 12v line.

 

[roachie]

Strange, mine went right on.

 

[Tate]

Get a Tee with two -4 males on the ends and a -4 female in the middle, and it will go on the stock fitting in the block.