I have a HX35 over a S475, im currently running the 12cm housing but wanna make sure I keep dp down, I purchased a 14cm wastegate and have read about guys opening em up to get at least a 30mm internal gate, what are the benefits of doing it to the 14 housing over the 12? ( I know you guys will say external but I cant do it yet)The set spools great and even though I would love a 62/12 on top I drive my truck in and out of traffic everyday and love the good manners of the 35.
One more question I have is will a new actuator such as one from ED with a tighter spring keep thing thing from fluttering, If I loosen up the rod to get the bottom charger on line a lil earlier I get a noticeable surge when the gate opens, also when cruising on the highway if I nail it I get the same surging till boost comes up or Ii back off and hit it again, its almost like the bottom turbo needed is surging when the gate opens early or the spring just cant control it, sorry for the rant:Cheer: but im close to having em dialed in and just need a lil assistance, Thanks:rockwoot:
One more question I have is will a new actuator such as one from ED with a tighter spring keep thing thing from fluttering, If I loosen up the rod to get the bottom charger on line a lil earlier I get a noticeable surge when the gate opens, also when cruising on the highway if I nail it I get the same surging till boost comes up or Ii back off and hit it again, its almost like the bottom turbo needed is surging when the gate opens early or the spring just cant control it, sorry for the rant:Cheer: but im close to having em dialed in and just need a lil assistance, Thanks:rockwoot: