Oversized connector Tubes on a CR
- Thread starter Nospark04
- Start date
HIGH TECH RAM
Haters!
- Joined
- Jul 24, 2007
- Messages
- 2,857
It'd be the same as a larger bore rail. I doubt it would make any difference. The rail and tubes are just a holding tank for fuel. Keeping them full is more important IMO
JasonCzerak
Active member
- Joined
- Aug 10, 2006
- Messages
- 14,827
I have a set that are drilled that I have not personally used. I'll sell them to you for a good price. I got them on trade.
The problem with the drilled and over sized tubes is they lack the filter. So if any metal or anything gets though the fuel system this filter deal is the last resort before injector destruction.
As HIGH TECH RAM said, these parts are just a holding bucket. The fuel system guys do not think they are the bottle neck yet in the fuel system. I'm willing to bet the injector it self is the next bottleneck.
PM me if you want them. but use with caution
The problem with the drilled and over sized tubes is they lack the filter. So if any metal or anything gets though the fuel system this filter deal is the last resort before injector destruction.
As HIGH TECH RAM said, these parts are just a holding bucket. The fuel system guys do not think they are the bottle neck yet in the fuel system. I'm willing to bet the injector it self is the next bottleneck.
PM me if you want them. but use with caution
triton
Scarlet Fever
- Joined
- May 30, 2007
- Messages
- 5,497
I ran a set of drilled tubes for a while and then changed them back to stock tubes. Didn't see a bit of difference. IMO, it doesn't help a thing drilling them out. As mentioned, their filter can help but, that shouldn't be an issue if your fuel is well filtered already.
As for the rail.... I have to disagree with you guys about it's benefit. There may be no hp benefit but, it definitely helps dampen the high psi pulses from the CP3 because of having a larger "tank", which in turn can only benefit your injectors.
As for the rail.... I have to disagree with you guys about it's benefit. There may be no hp benefit but, it definitely helps dampen the high psi pulses from the CP3 because of having a larger "tank", which in turn can only benefit your injectors.