p-7100 injector return line

[DTanklage]

anyone know if running a seperate return line for the injectors is req?

doesnt the factory do it that way?

with a air dog etc they tie the inj return in with the fuel returning from the ip

is that fine or is it better to return them separately?

injector return and ip return

thanks, don

 

[Signal 73]

I T-ed mine together, post regulator in my case.

If your just running the stock o/f valve id T it in without worries. doubt theres enough backpressure in the line to do anything bad to the injectors.

 

[DTanklage]

i pitched the over flow valve and am gonna flow the fuel right thru the pump and into a boost ref reg

sounds like i can just run the inj return line right into the back side of the reg

thanks, don

 

[Tate]

i pitched the over flow valve and am gonna flow the fuel right thru the pump and into a boost ref reg

sounds like i can just run the inj return line right into the back side of the reg

thanks, don

Whats the point of the boost referenced fuel pressure regulator?

 

[Jim Fulmer]

Tee into the return, been running like that for years! BOTW running a boost reference gained nothing on the dyno, back to back runs!

Jim

 

[DTanklage]

how did you have yours set up?