nick2001
New member
- Joined
- Aug 16, 2009
- Messages
- 314
Selling off some stuff from a p-pump 24v pull truck.
Scheid 24V alluminum runner intake w/.120 bent lines. 1500
Bullseye BatMoWheel S475. Has 4 hooks on it since rebuild/upgrade by Bullseye. It is a 75mm TCT wheel with race cover and a 96mm turbine. It will come with two press in aluminum 2.6 bushings. (one is .050 to the face of the wheel). I have two different exhaust housings for this turbo. A t-6 1.1 or a t-6 1.32. 2000 for the 1.32 or 2200 for the 1.1. 2300 with both
P-pump .093 lines. Mild steel and clamped. 400
.093 monster mikes connector tubes. 100
p-pump tunnel ram intake plate/riser 160
24v stock injectors. 90
p-pump pump gear. 100
24v valve cover. 50
Intake piping for type 22 frozen boost a/w on drivers side fender. 60.
I can send pictures via e-mail or text.
Scheid 24V alluminum runner intake w/.120 bent lines. 1500
Bullseye BatMoWheel S475. Has 4 hooks on it since rebuild/upgrade by Bullseye. It is a 75mm TCT wheel with race cover and a 96mm turbine. It will come with two press in aluminum 2.6 bushings. (one is .050 to the face of the wheel). I have two different exhaust housings for this turbo. A t-6 1.1 or a t-6 1.32. 2000 for the 1.32 or 2200 for the 1.1. 2300 with both
P-pump .093 lines. Mild steel and clamped. 400
.093 monster mikes connector tubes. 100
p-pump tunnel ram intake plate/riser 160
24v stock injectors. 90
p-pump pump gear. 100
24v valve cover. 50
Intake piping for type 22 frozen boost a/w on drivers side fender. 60.
I can send pictures via e-mail or text.
