p3000 pump information

andrewrj

New member
Joined
Jul 18, 2011
Messages
1
First off, I wasn't sure where I should post this so I apologize if it needs to be moved. Second, I am looking for as much information about the p3000 as possible. I am sure others have to be using this pump on mild street vehicles yet I cant seem to find much good information. I am in the process of doing a cummins swap in my f250. I have obtained an engine out of an f700. I know the pump is a p3000 with 11mm plungers and a RQV. That much was easy to find out. The information I guess I am looking for is about the fueling/timing aspect of this pump. I have read that the timing will be different for these pumps and you cant use the p7100 guides but there seems to be no information beyond that. I am only looking for 400hp and surly there has to be people who have reached that on an 11mm p3000 and others who will be looking to. Any help would be appreciated. :rockwoot:
 
I'm in the same boat.I put a 190hp bus motor in and pump doesn't say Bosch.just Cummins recon.how do I know if it is a 7100 or 3000?.I guess I did the mistake or doing a 3k and going from 11.5 to 18* and had to put my stock injectors from my 215 motor in cause the bus injectors were junk.tips looked like they sat outside for years n now it will start and idle perfect.but soon as you bring rpm up it chokes itself n blows with smoke like raw fuel.helpppl
 
I've seen a thread or two on those around here somewhere. Might do a little digging.
 
Back
Top