Part number help

[yoshi470]

Well i just got all my parts for my p pump swap and im in need a some part numbers. My stealership is a bunch of retards and if you dont have parts numbers you might as well not even walk in the door. In the diagrams below i need #6&7 part numbers. I also need the part number for the manifold intake gasket, gasket behind front tin cover, and the gasket behind the gear housing. Also what size are the nuts that bolt to the housing that hold the pump on? Thanks for the help

 

[tank21pa]

Pm SNEDGE he will hook you up. No need to look up stuff!! Awesome guy to deal with!

 

[yoshi470]

can anyone tell me where the front of the spring (#2) hooks to?

 

[CL2000]

The spring hooks to a small bracket that the pump suport bolt goes through. The nuts from your vp will hold the pump on. I would just use some right stuff instead of gakets on the cover and case. I have had better luck than using gaskets.

 

[AsTroSS]

1 3900629 Screw, Hex Flange Head Cap 3
3931468 Rod, Control 1
2 3915103 Nut, Regular Hexagon 2
3 3915104 Nut, Regular Hexagon 1
4 3931513 End, Control Rod 1
5 3931566 End, Control Rod 1
6 3931568 Rod, Control 1
7 3932397 Rod, Control 1
8 3931510 Spring, Tension 2
3931526 Lever, Throttle 1
9 3093946 Nut, Regular Hexagon 1
10 3931494 Pin, Control Rod Pivot 1
11 3931527 Lever, Throttle 1
12 3931532 Screw, Self Tapping Metal 1
3931559 Bracket, Throttle 1
13 3914353 Bushing 2
14 3914356 Clip 1
15 3923161 Bracket, Throttle Control 1
16 3926780 Washer, Plain 1
17 3929864 Screw, Hex Flange Head Cap 3
18 3930407 Bracket, Pivot Shaft 1
3931569 Lever, Bell Crank 1
19 3923158 Lever, Bell Crank 1
20 3932222 Screw, Hex Flange Head Cap 2

 

[AsTroSS]

3923898 Cover, Gear 1
2* 3918673 Gasket, Gear Cover 1
3* 3900709 Seal, Oil 1
4* 3920370 Screw, Hex Flange Head Cap 1 M8 x 1.25 x 73
5* 3920371 Screw, Hex Flange Head Cap 1 M8 X 1.25 X 50
6* 3920519 Housing, Gear 1
7* 3924962 Screw, Hex Flange Head Cap 10 M8 X 1.25 X 16
8* 3900633 Screw, Hex Flange Head Cap 8 M8 X 1.25 X 50
9* 3907998 Screw, Round Head Cap 2 M5 X 0.80 X 17
10* 3903924 Pin, Timing 1
11* 3904849 Ring, Retaining 1
12* 3913994 Seal, O Ring 1
13* 3919683 Housing, Timing Pin 1
14* 3915772 Seal, Rectangular Ring 1
15* 3931351 Gasket, Gear Housing 1
16* 3926846 Screw, Hex Flange Head Cap 5 M8 X 1.25 X 20

 

[AsTroSS]

Fuel pump nut 3902662 Hexagon Flange 4 , M10 X 1.50
3938152 Gasket, Int Manifold Cover 1

 

[yoshi470]

AsTroSS thanks a lot!!!

 

[roachie]

The spring hooks to a small bracket that the pump suport bolt goes through. The nuts from your vp will hold the pump on. I would just use some right stuff instead of gakets on the cover and case. I have had better luck than using gaskets.

X2.

All the bolts you need should be in that box. Although I'm not sure if I included that spring or not. :bang

Everything make it intact?

 

[yoshi470]

X2.

All the bolts you need should be in that box. Although I'm not sure if I included that spring or not. :bang

Everything make it intact?

I think i found the bracket where the spring mounts to josh but i dont have the spring. Everything made it intact :Cheer: