Parting a 1998 12 valve 5 speed 2wd

Mark Nixon

Mark Nixon

No Savior among the flesh
Joined
Feb 26, 2009
Messages
8,677
Parting a 1998 Regular cab, 2wd, 5 speed 3/4 ton.
Body is rough, has a few sheetmetal parts still okay.
The engine (53 block) is locked up and will be parted out, but I am keeping the P-7100 conversion, the wiring harnesses and the firewall PCM.

The following parts are available off the truck:

3.54 SRW drum brake Dana 80, $400.

2WD NV4500 conversion, includes pedals, trans from flywheel back, shifter, console, dash pocket and any other bolts I may have, $1200.

Complete hydroboost set-up, vacuum/power steering pumps, lines, hydroboost assembly, the whole set-up, $300 SHIPPED.

Flywheel housing, $100 SHIPPED.

Engine parts, NO PUMP OR CONVERSION PARTS, need to finish tearing it down to see what survived, ask/make offers.

Body panels, need to refresh myself on what is in good condition, please ask.

Reply, PM, Call or text 402-780-5127.
 
I know your keeping the harness and ecm but what is the value of one from a 98? I have one on the shelf from a project that got abandoned.
 
Last one I tried to buy, just this week, was $550 for the ecm and $250 for the harness.

Mark.
 
The bed on it is clean, but it has a lot of denting on it.
I'm going to go pick up a nice SRW bed on Monday, couple fair dents in it, but much, much better than this one.

I do have a pair of decent doors for regular cab.

Markl.
 
Considering selling the P-7100 conversion and the PCM/Harness set-up.

Mark.
 
Pump with ALL lines, case, cover, gear, supports, the whole mess, bolts and all, $1400 SHIPPED.

Mark.
 
Actually, the pump stuff sold last night.
So did the wiring and PCM.

Mark.
 
Mark Nixon said:
Actually, the pump stuff sold last night.
So did the wiring and PCM.

Mark.
Click to expand...

Mind if I ask what you got for the em and harness? I'm curious what the going rate is. I have 2 ecms and harnesses.

Also, got any tone rings left? I bought 4 or 5 from ya last time and need some more

Jeremy
 
Well, the stuff I had "sold" came back, apparently he didn't realize what the term "locked up core" meant, so it all came back.
I mentioned ECM and harness prices earlier, but if you'll take less, I'm in. :D

I do have some tone rings and short mounts, if you want them. :cool:

Mark.
 
Headed back east (Pitt., PA) to pick up a truck soon, can deliver parts.

Mark.
 
I do have a few spare Dan 80s out already.

I've postponed any travelling, due to it being a wet and muddy mess around here.
I can't load up stuff to go. :(

Mark.
 
1998 12 valve longblock, with all P-7100 parts, locked up, 53 block, comes with good turbo, injection pump, NO alternator, NO fan/hub, NO combo pump, or block plate, $1600.
Shipping for engines averages $300 to most locations. You may also pick up. :D

1998 5 speed PCM and engine harness, no fuse box/headlight harness, $600.

3.54 SRW drum brake Dana 80, $400.

MOST OF A 2WD NV4500 conversion, NO BELL HOUSING OR FORK, includes pedals, trans from flywheel back, shifter, console, dash pocket, column covers, $850.

Complete hydroboost set-up, vacuum/power steering pumps, lines, hydroboost assembly, the whole set-up, $300 SHIPPED.

Flywheel housing, $100 SHIPPED.
 
Mark. I have a 97 3500 4x4 automatic. In the market for items needed to convert over to nv4500. Would you have all items needed?
 
You must log in or register to reply here.
Top