Parting a 2003 crewcab 4x4

CSnyder

CSnyder

Snyder-Motorsports
Joined
Mar 3, 2008
Messages
6,278
Ive got a 2003 crewcab 3500 4x4 Im parting out. It is a HO truck with the 48RE. The truck is rolled so virtually every panel has damage and the shortblock is gone. I do have ALL the engine accessories (head, CP3, turbo, alt, rail, etc available) and the remainder of the drivetrain still here. Only parts sold are the shortblock and injectors so far. Truck is bone stock never turned up and drove fine after the roll and has 126K on it. Ill post up as when other parts sell so you know whats gone. Its usually best to call me 563-546-7772 Chris
 
looking for the right lower control arm from the front axle to frame steering box and power steering lines from block to booster and block to steering box rubber fuel links from engine to frame i bought a wreck 03 1 ton guy started to pull the engine and cut all the lines to the engine
 
cookzchoice said:
looking for the right lower control arm from the front axle to frame steering box and power steering lines from block to booster and block to steering box rubber fuel links from engine to frame i bought a wreck 03 1 ton guy started to pull the engine and cut all the lines to the engine
Click to expand...

I see no problem helping you get all the parts you need. I see your only a few hours away so feel free to call me and we can arrange for what you need. 563-546-7772 Chris
 
Did the drivers A-pillar panel survive? My uncles has broke loose from his fat butt hanging on it getting in and out and needs a new one LOL
 
JFlagg said:
Did the drivers A-pillar panel survive? My uncles has broke loose from his fat butt hanging on it getting in and out and needs a new one LOL
Click to expand...

I believe its good. Most damage was the passenger side.
 
CSnyder said:
I believe its good. Most damage was the passenger side.
Click to expand...

Is it the sand/light brown color? Let me know... I don't think he has the speaker there either. And price too so I can let him know.
 
All third gen A-pillars are the same color, and third gens do not have tweeters in the pillar, that was a second gen thing. :Cheer:
 
SPEEDSHIFT said:
All third gen A-pillars are the same color, and third gens do not have tweeters in the pillar, that was a second gen thing. :Cheer:
Click to expand...

I saw a 3rd ben A-pillar at a shop here in MO the other day that had a hole in it that I thought was for a speaker... Didn't look the right size for a guage pod.
 
GRotman said:
you have the trans wire harness?
Click to expand...

Pretty sure I shipped that out today with the engine harness. If you PM me Ill put you in touch with the guy who got it because I think he just needs the engine part but didnt figure anyone would want the other piece so I sent it along.
 
You must log in or register to reply here.
Back
Top