Parting Out 2000 24v 4x4 Quad Cab!

globaltruck1

globaltruck1

New member
Joined
May 27, 2009
Messages
634
Well I finally settled with my insurance today and will begin tear down of the truck this weekend. The truck caught fire under the hood and burnt up pretty good. The dash is cooked as well, but the seats were not burned but will definetley need a good scrubbing. I'm willing to sell just about any off the truck in order to get some of my money back out of it since the insurance company bent me over. The entire body is coated with line-x in white. Most parts are less than 6 months old such as
II 6X.016 Edm Injectors,
Head with o-rings, dual springs with titanium retainers from max spool.
Billet push rods,
Max Spool 2.5++ cam.
Bottom end is stock but looked good last time I had it open less than 2k ago. I do have a custom Silver Bullet 66 with a 71mm inducer wheel that I'm going to have rebuilt when I take it off.
NV4500 trans.
3.55 gears Dana 60 and 80drum
Just ask about any parts that may be of interest and I'll see whats good. Feel free to call anytime with questions 301-268-4295
 
Is the interior grey (not so much from smoke) and the console in the middle ok? The top of mine has a big hole where my elbow sits. Would you sell me the top off the console for a reasonable price if it is in good condition?
 
4x4dually said:
Is the interior grey (not so much from smoke) and the console in the middle ok? The top of mine has a big hole where my elbow sits. Would you sell me the top off the console for a reasonable price if it is in good condition?
Click to expand...

Yea its the grey fun color pattern. Console is good just would need scrubed. $50 plus shippin for the whole thing sounds fair to me!
 
Is it the Truck in your Avatar? If so how much for the Front bumper?
 
globaltruck1 said:
Yea its the grey fun color pattern. Console is good just would need scrubed. $50 plus shippin for the whole thing sounds fair to me!
Click to expand...

I'd be cheaper to ship if it was just the top. Not trying to screw ya or be a tight ass, but how's 'bout $25 for just the top? If not, that is ok too.

Phil, whatcha gonna put a dodge bumper on? That cheby won't hold it up. :D
 
price on head, push rods, and camshaft??

Also any chance the turbo could be built back to a standard 66 silver bullet?
 
wideopen said:
Is it the Truck in your Avatar? If so how much for the Front bumper?
Click to expand...

Thats it! Not real sure how good the front bumper is. Don't think it melted. If its in good shape when I pull it this weekend I would take $200.00 plus shipping and don't forget it is coated with Line-X
 
Ohhh I didn't see the Line-X coating. I don't think that will do me any good. Thanks anyway.
 
Do you have the connector tubes for the injectors? How much shipped to 68008? Also how much for the head? Thanks.

Eric
 
globaltruck1 said:
Thats it! Not real sure how good the front bumper is. Don't think it melted. If its in good shape when I pull it this weekend I would take $200.00 plus shipping and don't forget it is coated with Line-X
Click to expand...

how much of a pain is it to get linex off?
 
Looking for a NV4500 swap for my auto....How much for all the swap parts?
- Trans, transfer case, drive shafts, clutch, hydraulics, cross member, etc....
 
TMills said:
Looking for a NV4500 swap for my auto....How much for all the swap parts?
- Trans, transfer case, drive shafts, clutch, hydraulics, cross member, etc....
Click to expand...

The only thing I have left is the tranny and cross member. Locally have the transfer case pedals shifter and console sold!
 
Any chance of just getting the carrier and R&P out of the front axle? My dad just blew his up on his 97. Thanks.
 
You must log in or register to reply here.
Back
Top