12vriviera
That Guy with that car
- Joined
- Mar 31, 2009
- Messages
- 6,846
Taking parts off the car for the next iteration.
I have a 24v head with valves, small cracks around exhaust, but was running good.
Make offer.
Hamilton. 110 valve springs. Used. 250
24v rockers. Stock with bridges and bolts. 175
VP lines, great shape no rust. With hold downs. 150
Valve cover with breather ports threaded into it. Aluminum. 100
Used So vp44. Tapped wire. Fed with aeromotive at 18 psi while making power.Ran great until I pulled in December. 500
Also have gt4202. Chra is less than 2 years old. Bearings feel new. 5k miles at most 550 plus shipping. 1.01 t4 turbine housing
Made 530 HP at 40psi (non loaded dyno) and ran 11.80s at 115 with this pump and the above parts..
Car usually runs 65psi.
Pm me here or text at (940)453-9280
I have a 24v head with valves, small cracks around exhaust, but was running good.
Make offer.
Hamilton. 110 valve springs. Used. 250
24v rockers. Stock with bridges and bolts. 175
VP lines, great shape no rust. With hold downs. 150
Valve cover with breather ports threaded into it. Aluminum. 100
Used So vp44. Tapped wire. Fed with aeromotive at 18 psi while making power.Ran great until I pulled in December. 500
Also have gt4202. Chra is less than 2 years old. Bearings feel new. 5k miles at most 550 plus shipping. 1.01 t4 turbine housing
Made 530 HP at 40psi (non loaded dyno) and ran 11.80s at 115 with this pump and the above parts..
Car usually runs 65psi.
Pm me here or text at (940)453-9280