parts

J

Josh Woodruff

New member
Joined
Aug 13, 2006
Messages
21
Things trying to get rid of email me for more info. prices do not include UPS.

3-LB7 Duramax turbos take offs---$200.00each

2-HX-35 18.5cm exhaust housings---$50.00each

2-Hx-35 turbos good take offs---$300.00each

2-06 CR Dodge turbos take offs-$300.00 each

2-Used HX 55 turbos take offs---$75.00each

1-New HX 50 center section 2.5" inducer---$350.00

10-Used 2V 5.9L Piston sets w/wrist pins ---$100.00per 6

25--Used 2V and 4V camshafts ---$50.00 each

4- 47RE 2WD take outs---$500.00 each

1-NV4500 2wd take out of 96 Dodge works fine---$850.00

20-Stock 47RE input shafts---$35.00each

30-Stock Nv4500 mainshafts---$45.00 each

1- 99 Dodge Dakota ext. cab short box 2WD was going to be a project never happened. Has blown 318 gas enigne and transmission. $750.00


Thanks
holly@woodruffdiesel.com
 
2-Used HX 55 turbos take offs---$75.00each

Am I reading this right or am I missing something? Are you selling a complete hx-55 for 75.00 each.
 
Lavon

We still have over 100 sets of the 4V springs.

The HX 55's are good take offs no thrust movement no side to side just look rough.

the inducer on the HX 55 is 2.530 and the back of the wheel is 3.780
they have 22cm housings with 5" exhaust outlets
the bolt pattern for the mounting flange is 3.685 center to center on width and 3.600 center to center on height.
 
Josh Woodruff said:
Lavon

We still have over 100 sets of the 4V springs.

The HX 55's are good take offs no thrust movement no side to side just look rough.

the inducer on the HX 55 is 2.530 and the back of the wheel is 3.780
they have 22cm housings with 5" exhaust outlets
the bolt pattern for the mounting flange is 3.685 center to center on width and 3.600 center to center on height.
Click to expand...

Will the 55's bolt right up to a dodge manifold. If it will fit count me in.
 
An HX55 is a strong 2.5" turbo, especially if you can find a T-3 17cm housing for it.

Eric
 
You must log in or register to reply here.
Back
Top