Pigtail/connector plug in for throttle pedal.

[DieselheaD]

I can't find it, any ideas where to search? an aftermarket connector by itself will work but don't know how to describe it other than 6-pin flat connector.

 

[DieselheaD]

For an 06 pedal

 

[Mark Nixon]

I have a couple, still.

Mark.

 

[DieselheaD]

Let me know what you want for it I'll paypal when you're ready

 

[Mark Nixon]

I'd take $15 SHIPPED.
You should have my info.

Mark.

 

[DieselheaD]

Thanks mark, I pm'd you

 

[Tobin]

Just a FYI, I have grabbed them off Hemi gas trucks I believe.

 

[Mark Nixon]

I have removed them from the following vehicles:

2005-06
Ram 1500, 2500, 3500, gas or diesel.
Dakota.
Durango.
Charger.
Challenger.
Minivans.

I've pulled them out of certain Jeeps from 2005 through 2008.

One thing to be aware of is that the wiring color codes CAN be different, so having pin # designations is advisable.

Mark.

 

[DieselheaD]

The pigtail your sending was off a diesel correct? I have the wires identified but I don't have a diagram on how the should be connected to the pedal

 

[Mark Nixon]

Yes, it was diesel.
If you have any confusion, call me and I'll help you sort it out.

Mark.

 

[DieselheaD]

Yes, it was diesel.
If you have any confusion, call me and I'll help you sort it out.

Mark.

Cool, thanks mark.

 

[Kronk]

Yes, it was diesel.
If you have any confusion, call me and I'll help you sort it out.

Mark.

Mark what a good place to get some type of wiring diagram?
I'm trying to figure out how to wire in a 5.9 pedal pig tail into a 2008 6.7 truck that has a 5.9 ecm conversion using the Fleece harness.

 

[Mark Nixon]

Fleece or Joefarmer on here.

Mark.

 

[DieselheaD]

Should be

Pin # 42 c1

#3 c2

#33 c1

#48 c2

#35 c2

#33 c2

For the 5.9 cm849b