was planning on building a puller but I was told a couple of days ago that im getting laid off from my job so something have got to go.
24 valve head, milled intake, heavily ported and polish job, new valve seats, and hamilton valvetrain. no run time since all the work was done to it. i do also have a stainless sidedraft intake that the head is drilled and tapped for. $3000 obo or $3650 with intake
schieds bulit 12mm 215hp p-pump. 600cc's, fullcut delievery valves, .120 holders, auto govenor, set for 6,000rpms, has 15 passes on it since flowed $1,600 obo
Forced Inductions s480/92 1.10 a/r with both t4 and t6 exhaust housings. This turbo is set up for quick spool and has FI's low drive pressure 92mm turbine wheel. less than 3k miles. $1,100 obo with both housings
billet wheel 66/74/.91 turbo. un-polished housing, t4 exhaust, no gated. has roughly 4,000 miles on it. no shaft in or out or side by side. $1,300 obo
3 piece manifold for 24 valve, t4, heavily ported on both the entrence and exit side, also it is complete heat rapped. i do have a spool valve that will go with the manifold as well. $750 obo
westons 6x16 injectors, set to p pump pressures, were redid and have 3 hooks on them. $600 obo
ht4c holset turbo, 88/120/1.15 t6 flange, has only 200 miles on it. $900 OBO
64/71/14 industrail injection turbo. Was rebuilt about 7,000 miles ago. no gated, polished comp. housing. i will include a down pipe that will work. $1,000 obo
i also selling everything i have to put a p pump on a first gen. 190hp pump with 130,000 miles, timing case, pump gear, pump bracket, lines, return lines. I might be missing a couple of bolts and thats it. $900 obo
Adjustable p pump timing gear, allows for 40 degrees of timing adjustment in 2 degree increments. Comes with the key required to key the hub to the pump shaft $300 obo
Billet Front Timing Gear Cover for 94-02 5.9 cummins, Works with all factory installed components, no machining of balancer, no spacing fan hub out, no trimming your vacuum pump shaft. $300 obo
all the prices are plus shipping. i dont know how to post picture on here so if you want photos i can email them to you. if any question text me at 319-795-7093 or pm me. thanks
24 valve head, milled intake, heavily ported and polish job, new valve seats, and hamilton valvetrain. no run time since all the work was done to it. i do also have a stainless sidedraft intake that the head is drilled and tapped for. $3000 obo or $3650 with intake
schieds bulit 12mm 215hp p-pump. 600cc's, fullcut delievery valves, .120 holders, auto govenor, set for 6,000rpms, has 15 passes on it since flowed $1,600 obo
Forced Inductions s480/92 1.10 a/r with both t4 and t6 exhaust housings. This turbo is set up for quick spool and has FI's low drive pressure 92mm turbine wheel. less than 3k miles. $1,100 obo with both housings
billet wheel 66/74/.91 turbo. un-polished housing, t4 exhaust, no gated. has roughly 4,000 miles on it. no shaft in or out or side by side. $1,300 obo
3 piece manifold for 24 valve, t4, heavily ported on both the entrence and exit side, also it is complete heat rapped. i do have a spool valve that will go with the manifold as well. $750 obo
westons 6x16 injectors, set to p pump pressures, were redid and have 3 hooks on them. $600 obo
ht4c holset turbo, 88/120/1.15 t6 flange, has only 200 miles on it. $900 OBO
64/71/14 industrail injection turbo. Was rebuilt about 7,000 miles ago. no gated, polished comp. housing. i will include a down pipe that will work. $1,000 obo
i also selling everything i have to put a p pump on a first gen. 190hp pump with 130,000 miles, timing case, pump gear, pump bracket, lines, return lines. I might be missing a couple of bolts and thats it. $900 obo
Adjustable p pump timing gear, allows for 40 degrees of timing adjustment in 2 degree increments. Comes with the key required to key the hub to the pump shaft $300 obo
Billet Front Timing Gear Cover for 94-02 5.9 cummins, Works with all factory installed components, no machining of balancer, no spacing fan hub out, no trimming your vacuum pump shaft. $300 obo
all the prices are plus shipping. i dont know how to post picture on here so if you want photos i can email them to you. if any question text me at 319-795-7093 or pm me. thanks
