power seat conversion

G

greencummins

New member
Joined
Oct 4, 2010
Messages
144
Anyone done a conversion for powerseats into a non power seat truck? my seats came out of a 99, going into an 01, the only plug in the floor and under the carpet is for the seat belt light. theres like 9 wires coming out of the power seat plug, bottom line, what do i do?

thanks guys

Jake
 
hey jake
i did power seats into my 01 that had no power before and if i remember right there is a plug under the seat that i just spliced the power wires into the plugs are different but i just hard wired all the same colors and i think the only thing that does not work is the back adjustment
 
I will post a pic of what I did and you should be able to figure out the rest the plug that was under my seat just needed a few ribs cut off and it slid right in place.
 
2012-05-22200828.jpg
more than ribs I guess I just cut off all the sides of the large plug surrounding the pins it works great and then put a fuse in. the fuse goes in the cab fuse box. The only part I havent figured out is the heated seats.
 
You must log in or register to reply here.
Back
Top