power windows/doors on NON-power

F

FosterW

How Now Brown Cow
Joined
Oct 28, 2008
Messages
460
My truck is an ST model with crank windows and manual locks:doh:

If I were to find doors off an SLT truck would I be able to "plug them in" and have power windows and locks? I know the fuses aren't there but that isn't a problem.
What do you guys know about this?
 
You will also need an SLT model dash harness to make them work as well as the CST box to use the remote entry fob. The fuse panel already is set up for plug and play with your new SLT harness so its just a matter of adding the door wiring with window motors and electric unlocks and the dash harness which is easy to install and plug it all in. If you buy doors make sure you get the key and fob with those.
 
If you are lucky, You truck might be with installed wiring from factory.

I changed cab in my 3500, it had manual windows ,but also wiring harness for power doors and windows
 
Good call on the key fob.. I didn't think of that.
How would I know if the wiring is already in place AsTross?
 
Just remove kick panels and stretch cables out.



If you do not have power accessories wired, you only have one cable for seakers,

If you have wiring connected: you have 2 open connectors
 
Dangitt. Looks like I only have the wires for the speaker. I didn't see any empty connectors..

CSnyder, whats it like puttng the dash harness in? Sounds like you have experience with this
 
FosterW said:
Dangitt. Looks like I only have the wires for the speaker. I didn't see any empty connectors..

CSnyder, whats it like puttng the dash harness in? Sounds like you have experience with this
Click to expand...

You need to loose steering column and tilt dashboard.
 
You must log in or register to reply here.
Back
Top