Ppe dual fueler snag

[murphyj]

Hey guys maybe some insight that could help me. So was installing my dual fuelers tonight hit a few snags. First one was with the fleece coolant bypass the coal ant neck doesn’t line up with the hard pipe from ppe. Second snag was trucks a 04.5 but doesn’t have the kick down cable relocation bracket for trans and one run into this issue either? Any help would be greatly appreciated.

 

[Justappumped24v]

As far as the first issue goes I had the same issue on my 06... loosen the hard pipe hardware and install both Ppe hoses then tighten the hard line

 

[murphyj]

As far as the first issue goes I had the same issue on my 06... loosen the hard pipe hardware and install both Ppe hoses then tighten the hard line

Was that with the fleece coolant bypass? I swear everyone’s post must go to you for the answer

 

[Justappumped24v]

Was that with the fleece coolant bypass? I swear everyone’s post must go to you for the answer

Yes I had the riser with a Fleece bypass, it’s tight but it worked that way for over a year no issues

 

[RandomHero]

I don't have the bypass, so I cant help there. I also have an 04.5 and didn't have the bracket. PPE wants an absurd amount of money for that bracket, so I made my own. If I was smart enough to post pics, I would. I can text/email pics though if you want.

 

[murphyj]

I called them talked to this nice gentleman Eric and he had no problem sending me my bracket!

 

[Sanger]

For the SS coolant pipe just make a spacer with a longer bolt where it mounts to the intake manifold.