ppump 24v lines

12valveauto

12valveauto

New member
Joined
Mar 28, 2011
Messages
201
What are the best lines ? Mild or stainless ? And what size is the best?I'm going to be ppumping my 24v soon and I don't no what to go with. Some say stainless is a no for a daily driver. Bc they crack easy. What do some of you prefer ? My combo is ED 66/74/.90 mach7s h2 cam mild built motor. If that helps..
 
Mild steel with many hold downs in .084.

Sent from my DROIDX using Tapatalk
 
I got mild steel in the .093 form. Now I don't necesarily regret getting .093, but if I had to do it again I would go .084.
 
How about cross tubes ? Stock with the .84 lines. I was going to try and run the mach7s . I don't think they will be to big for my setup. I see some guys running 6x18 and they art super smokey.
 
I had .093 tubes for a while. The lope made me want to kill myself and pretty much would shake the truck. It has no use at all. I changed them back to stock with an injector similar to a mach 6 and I saw no difference in anything.
 
Stock tubes and .084 mild steel. I've read that they also make .078 lines which is factory size.
 
You must log in or register to reply here.
Back
Top