--------------------------------------------------------------------------------
Problems With 01
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
This has been going on for a while now ,thought I could fix it but. Here goes eng. is slugesh when shifting gears rpm drop like a rock,before you can shift from 3rd to 4th it has fallen all the way to idle.When coming to red light you kick it in neutral, rpm will fall below 600 then surge up and down a couple times if you have A/C on it will almost die. Put new APPS on yesterday no help, had eng. scanded and it says the cam sensor is not working so replaced, still says not working. Unpluged the Edge Ez and no help. Vp is about 2 years old and been running two stroke.
Checked into cam sensor and it is reading at cranking speed. Would having ECM reflashed help you think? It has to be a timing issue,do you think it would be vp44? Truck will not throw a code.
--------------------------------------------------------------------------------
JLWelding's Sig:My Truck: 01 Dully - Skirted Flatbed Welding Trk - Weight 8900k - Edge Ez - Boost Elbow - Pricol Optix - Fuel - Boost - Egt Gauges - Bhaf - 5 Inch Stacks Straight - Airdog 100 - Two Stroke Oil - Rv 275 Injectors - BD Intake - Amsoil - Southbend Clutch - Grid Heater MIA 224k - Heavest Load 32900k - jlweldingtx.com
Problems With 01
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
This has been going on for a while now ,thought I could fix it but. Here goes eng. is slugesh when shifting gears rpm drop like a rock,before you can shift from 3rd to 4th it has fallen all the way to idle.When coming to red light you kick it in neutral, rpm will fall below 600 then surge up and down a couple times if you have A/C on it will almost die. Put new APPS on yesterday no help, had eng. scanded and it says the cam sensor is not working so replaced, still says not working. Unpluged the Edge Ez and no help. Vp is about 2 years old and been running two stroke.
Checked into cam sensor and it is reading at cranking speed. Would having ECM reflashed help you think? It has to be a timing issue,do you think it would be vp44? Truck will not throw a code.
--------------------------------------------------------------------------------
JLWelding's Sig:My Truck: 01 Dully - Skirted Flatbed Welding Trk - Weight 8900k - Edge Ez - Boost Elbow - Pricol Optix - Fuel - Boost - Egt Gauges - Bhaf - 5 Inch Stacks Straight - Airdog 100 - Two Stroke Oil - Rv 275 Injectors - BD Intake - Amsoil - Southbend Clutch - Grid Heater MIA 224k - Heavest Load 32900k - jlweldingtx.com