prv help

G

gribble21

New member
Joined
Mar 6, 2012
Messages
38
I just stacked my edge with a power puck and the stock prv on the rail cant handle it so im going to get a new one how high does the stock prv go before it dumps. Which prv should I get right now im running the edge w/attitude, power puck, banks intercooler, banks high ram, intake and exhaust. In the near future I will have a modded cp3 and 100 horse sticks and maybe a modded rail. Should I go with the 27k valve or a 30k valve or is the 30k valve to much for me?
 
Cap it....he he he!

Seriously why are you running a psi box? Do you have a rail psi gauge and are you know where near 26k at wot?

Throw the power puck in the garbage and look into a smarty or efi if your year will work.

This combo has melted pistons and cracked nozzles all over it.
 
We only make the 27K for factory only motor..And I have to fill orders for the 30K 1st it will be mid summer before I do 27k.
 
Like Todd said. 27k on stick tips. I ran than cprv on my 06 w/ 40% nozzles and 85% cp3. It always held 26-26,500 no problem.
 
You must log in or register to reply here.
Back
Top