pulling parts

Smoking S

Smoking S

New member
Joined
Nov 23, 2006
Messages
621
Hx 60 3inch protrusion 150 thousandths map Columbus 8 blade billet wheel 26 t6 foot around 50 passes. 3.6 exhaust wheel Cleaned and checked. Still feels as tight as the day I got it. 2500. Comes with oil line, return, and hood stack.
Columbus diesel t4 casted exhaust manifold for hx 60 3.6 wheel.
ATS t6 manifold drilled for 6 egg probes 400
12 inch velocity stack to 6 inch setup runs from front grill to turbo. Has an air shut off. Not a cheap blast gate. Also comes with black vinyl cover for hauling. 450
12 valve block fire ringed and has a fresh 40 over bore never ran. 750
Eep billet steel cam, gear welded on. Ex lift 525 int 529 exh relief 100 int 650
Scheid ss 12 valve 120 lines clamped 2 or 3 pulls. 400
Arp 14 mm main studs 20 passes one torque 225
T4 ATS center section only 250
Prices are obo. Have pictures, can text them
 
12 valve block stiffner plate. Drilled out so 14mm studs dont hit. 100 turbo has two people in line. Gave a guy first chance at it.
 
Pictures of the velocity stack to 6084821688 also will the girdle and main studs work on a 24v?
 
Velocity stack and gate sold. Lines are factory bent but in 132546 firing order on the injection pump. Could be bent back to factory 123456 order im sure.
 
Main studs sold. Also have a set of 12 mm 12 valve head studs. Several torques. Rocker bolts have bwen cut off some to clear valve covers 200.
 
Stroud bellhousing blanket notched for a mid plate between transmission and bellhousing.250 Dry sump pump and tank. 2 scavenge. 1 pressure. Lots of braided line. Bought it off race car for pulling tractor. Sold tractor. 700.
 
Ill take the center section call or text (813)477-5953
 
You must log in or register to reply here.
Back
Top