Pump, injectors, or another chip?

farmboy3510

New member
Joined
Sep 17, 2008
Messages
208
Well I have been brush pulling my truck and I seem to be at a cross road. I finally got my twins where they are working good but now I would like to have more. With the HO pump is it a waste of time to stack a smarty or trade to an adrenaline? Should I go to a SO pump or a BD pump but I still tow a 30ft gooseneck w/ it, I don't know what would work better for towing and brush pulling. Some people say just throw bigger injectors to it. I don't know what to do next any advice would be a great help:thankyou2:
 
With the HO pump did you notice a difference when you stacked the smarty, people keep telling me that the HO will not handle a stack, but I don't know. I put the 150's in and it made a big difference over the 110's so I guess it makes sense that the 200's will work even better, but will the pump be able to move enough fuel to make them work right?
 
Id say keep the setup you have an just get a SO Pump, or a hot rod pump. I put a ht3 s400 twin set on my old truck with ddp 250's an the new owner pulls a 32ft camper with it just fine now. Best bang for the buck....id put a new pump on it.
 
Last edited:
dumb question i know what the hot rode pump is what is the SO pump
 
IMHO for what its worth, get the BD pump and 200 horse sticks and stack the edge with a smarty. If that doesn't do it for you, you should probably just ditch the ram and get a Duramax. A properly tuned Duramax with EFI Live and the proper supporting mods will basically eat most dodges for breakfast lunch and supper. :ft: :st:
 
ive got a HX35, II HRVP44, 100s, quad boost fooler my truck runs very good i would get a so pump or a hotrod and some 7x12s its up to you but you cant sled pull with twins unless the local pull lets you

my truck will keep up just fine with a 600hp fleece duramax a buddy has if i had the same size turbo as he has he would have a problem not meand a duramax only good for 600hp then you got to upgrade pistons and rods
 
Back
Top