Question about Water/Meth

[Nail-it]

Been thinking about adding water/meth to my 03 LB7. Aprox. how much HP does it add, and is the only other advantage cooling the EGT?

 

[rustyshakelford]

depends on the amount of meth kinda, but also allows you to stay in it longer due to the egst not getting as hot as quickly.

brett

 

[Nail-it]

Thanks, i've herd of Snow,is there a better on out there ?

 

[Noreaster]

Be careful with that stuff, better to spend some money on airflow improvements.

 

[Camotanker]

i dynoed for the first time with my snow performance 220psi kit this weekend.

with one red jet (medium) with 50/50... i netted 667hp. on diesel only it was 652hp. so a 15hp gain. i will try a blue (large) nozzle next and see what happens. i blew the headgasket 2 months back using 2 large nozzles on my first run out.

 

[rpainter]

Thanks, i've herd of Snow,is there a better on out there ?

I am running devilsown stuff.controller adjustable in cab and a lot cheaper than snow,

 

[Nail-it]

Thanks

 

[BullfrogJohnson]

I am running snow stage 2 and love it but I dont run meth, just water for the cooling aspects

 

[JacktheBear3]

The amount of Meth should be in direct proportion to your tuning, more timing equals less meth..... Ask me how I know.

 

[Double J]

I am running devilsown stuff.controller adjustable in cab and a lot cheaper than snow,

What nozzles are you running? I'm running a #5 and #10 nozzle with the 220psi pump and no EGT drop so far. I'm gong to take out the #5 and replace it with a #14 and see what happens.

 

[ramtough01]

i have it and it helped some sled pulling i have the 150 psi with 2 625ml nozzle i had just one in and it didnt help but after i put 2 in it helped

 

[rpainter]

What nozzles are you running? I'm running a #5 and #10 nozzle with the 220psi pump and no EGT drop so far. I'm gong to take out the #5 and replace it with a #14 and see what happens.

I am running a 12 and 14 gph nozzle in my grid heater delete spacer.