Rear window removal?

[Dazed&Confused]

Not sure if this is the correct place for this but does anyone know an easy way to remove the rear window out of a 94-01 Dodge ram? They are glued in and I need to know the easiest way to remove them. I found a ton in the local junkyard just need an easy way to get them out.

Andy

 

[cm cows]

a big Hammer like this *bdh*

 

[Billysgoat]

Needle and thread.

I'm serious, take a large sewing needle and the strongest fishing line you can find, use the needle to go through the urethane carrying the line, drop a few inches and come back out. Now "saw" through the sealant holding the window in that spot. Move to the next and repeat.

If you have someone who can help try this also.

You will need some .032 stainless wire, safety wire as used in industry and aviation works great. Heat one end and push through the sealant, wrap a few turns around a screwdriver handle or some such and seesaw your way around.


And if all that fails???



I personally recommend a brick

 

[smoken02]

music wire(guitar string) works great to seesaw with also. it holds up well to the heat generated from the friction of sawing.

 

[BFD99]

guitar string and two vise grips to hold the wire to not kill your hand from the thin wire.