redline box issue????

outlaw99

outlaw99

New member
Joined
May 20, 2008
Messages
4,209
well my redline box has the optional fuel enhancement mode, you can watch under the 2nd display options. I have my box set at 88% but when I watch my actual enhancement it will only go to 50% and when I set it at 100% it will only go to 60%. anyone else ever run into this problem????
 
Bigger injectors will empty the rotor head of the vp44 pump faster then a stock injector. The reason it is not fueling all the way is because it is reading that the rotor head is empty and it will not fuel anymore. (hence the 60%) Try running a lower percent like 50 -70 % and you should notice a large difference in power and quality of powerband. Also before i figured mine out it would break up real bad at higher rpms due to the fact it had no more fuel to serve. I had the same problem and i lowered my percent to about 50-60% after numerous talks with Blue Chip Diesel . That is were it runs the best for me. Play with it ... they take some time to figure out what they like.
 
well I Hve had it on for about year now. I was only asking becuase i think my vp might be dying I wondered if it would cause this. the truck made its most power on the dyno and sled pulling when at 88%. I just thought it would say 88% on the enhancement mode. thanks danny
 
how do you get into that other mode? im not sure if mine will do it, but id like to try.
 
before you start the truck, key the truck up but hold all three buttons at the same time two black and one red. hold them and key the truck up untill it starts saying, fuel on ,fuel off,fuel on yada yada. then you can navigate throught the modes. like voltage test,line display second line display. you want to choose second line display. and then fuel enhancement.
 
talked to chip today he said that is normal. I said why does it work like that he said.....'' I cant let you in the backdoor''.....:rules::shake:
 
You must log in or register to reply here.
Back
Top