Redline Box

[showincattle]

I have a redline that I have sent to Chip to get some updates and for him to check out why it says "Pump Volts?", but I got it back and it still reads the same. I know it has a good tap it is on a stealth cover that came on the pump. It seems to fuel to 4000 still but at 3700-3800 it has aglitch it feels like and then proceeds to climb. Should I send it back? Has anyone had this problem and does anyone have any suggestions? :bang

 

[2deerwhistlers]

start by checking to see if the pins are spread in the amp connector on the harness side, back of the vp.. there is a tool, if you cant insert it in the holes youre good to go.. if you can you need to get some pigtails with pins from cummins... good luck

 

[showincattle]

So what your saying here is to check the plug on the back of the pump? Where can I find this tool and what are the pigtails for and where can I get them?

 

[dieseljunkie]

Did you ever adjust your APPS for voltage. If not call Chip and he can tell you how to set it up.

 

[showincattle]

Well would that affect your pump connection?

 

[showincattle]

the box also says "pump trigger?" when you start it

 

[cummins724]

the box also says "pump trigger?" when you start it

If the light comes on, it passed the pump trigger test.

 

[showincattle]

Well when it passes the test the light does come on.

 

[cummins724]

Well when it passes the test the light does come on.

Its working then. When it says "pump trigger, that is a test that the box runs to see if voltage is in range. If the light comes on, all tests passed.