Redline Q

[jktcummins]

Ok what all else is needed to stop defueling and electronic issues when you run the redline???

Will the redline do away with boost fooling?
Will it do away with traction managment???
Will it do away with top speed limiter??????

 

[cummins724]

I've been reading up on these things lately. Won't get rid of torque management, doesn't do boost fooling, not sure about top speed. They don't seem very reliable from what I'm experiencing & have read. They do run well over Redline, but feel weak below redline. I had some fun last night running Adr on pl02 with the redline.

 

[Ascholting]

Not sure about the the traction management but i had my map plug from the redline in the sensor in the head and the other plug from the redline hooked to the edge box and then the edge box plugged in last to the trucks map wires so the edge box was doin the boost fooling and the redline would read boost to display in cab.
The redline that i have has all the latest updates from chip it is a monster it dont give a F**** what is goin on if the fuel is on and you WOT the smoke will Roll and when the turbo lit it was on all the way to 4 ran the strongest from 2400 to 3600 but it would pull to 4100 might be the cam helpn that
You should get check engine light and lots of codes but if it runs like mine did it was ok with me
My truck ran best at only 85% to 88% fuel but that was my setup HRVP Mach7+ Redline comp no wire tap on the comp

I still have my redline it is for sale by the way just had 2 have more and the next step was ppump!!!!!

 

[jktcummins]

ok so for the Traction managment and defueling a BD RAD
For the top speed the smarty
And what about the boost fooling do i need to get a boost fooler to put inline?????

Just trying to figure out what all i am going to need to get the most out of my 02. I have heard they are the worst of all of them to try to tune and get the most out of.

 

[BgBlDodge]

Smarty does boost fooling also. I've heard an EZ stacks well with a redline.