Removing brake rotors off 99 dodge

[Black98cummins]

As bad as i hate to have to do this i gotta rplace my rotors their about done like paper thin whats the easyest way to remove the rotor since u gotta take the wheel bearing off is there any tricks or easyer ways to get it off

 

[M_Thomas07]

Loosen up the 4 bolts for the wheel bearing but leave them threaded in about 3 turns or so. Start the truck, put a socket with extension on one bolt and use the power steering to press them off. It might need a good wack with a hammer if there froze on there.

 

[Black98cummins]

Like turn the wheel or somethin

 

[apocalypse1812]

Ball-Peen Hammer

Make sure you replace your lug studs too.

 

[LNicholson]

Polish up the hubs where they fit into the knuckle with some crocus cloth and use anti-seize so the next time won't be such a pain....

 

[M_Thomas07]

Yes turn the wheel. And yes polish all the rust off. It might take a little bit of working but thats the best way to do it.

 

[IRONHEAD79]

rotors

"Agree^^^"