DART505 WFO ALL THE TIME Joined Jun 1, 2006 Messages 1,198 Mar 18, 2007 #1 I want to know from someone that has removed this from behind the mechanical lift pump if there is anything else that needs to be done??Without the thickness of the housing there is it going to bottom the pump out?
I want to know from someone that has removed this from behind the mechanical lift pump if there is anything else that needs to be done??Without the thickness of the housing there is it going to bottom the pump out?
DWitcher Dr. Frankenstein Joined Oct 7, 2006 Messages 441 Mar 18, 2007 #2 I cut the spacer off of the fuel heater and re-installed it due to the fact that there needs to be a spacer in there.
I cut the spacer off of the fuel heater and re-installed it due to the fact that there needs to be a spacer in there.
moneymaker44 New member Joined Aug 7, 2006 Messages 666 Mar 21, 2007 #3 scrapped my heater as well but the mine is an old 12v ! heater is to far away to be effective and is just a good sorce for an air leak .
scrapped my heater as well but the mine is an old 12v ! heater is to far away to be effective and is just a good sorce for an air leak .
Snedge Comp Diesel Sponsor Joined Sep 1, 2006 Messages 18,886 Mar 21, 2007 #4 I just cut the spacer part off of the bracket and use it.