Replacing Airdog Filters ??

Fuel filter in a fleetguard is FF5324 or a baldwin BF7634, now for the water sep. i use a baldwin BF1275. i do have somemore filters but they are just different brands. you can cross them yourself.
 
O and the fuel filters are about an inch or 2 longer. i was goin to use a CAT filter that i crossed to these numbers but the filter inside thinger hit the filter head on the airdog.
 
i run the baldwins, and yes they are longer.

had to cut and bend the skid plate due where i mounted my airdog.
229365_10150169264246947_568161946_7010706_2679548_n.jpg
 
Check your local semi turck parts dealer. they can either get them or a filter that crosses to them. or even go to NAPA or Carquest, they can also cross them.
 
I think my stuff hangs too low, what ya think?
 

Attachments

  • ImageUploadedByTapatalk1319608903.619725.jpg
    ImageUploadedByTapatalk1319608903.619725.jpg
    22.1 KB · Views: 0
17cumminsboy said:
Fuel filter in a fleetguard is FF5324 or a baldwin BF7634, now for the water sep. i use a baldwin BF1275. i do have somemore filters but they are just different brands. you can cross them yourself.
Click to expand...

Do you know what micron these are?
 
Well the FF5324 and/or Baldwin Bf7634 are crossed from a Cat 1R0751 or 1R0759 and those are a 2 micron filter so my guess is that they would be close to that. I was goin to use the cat filters on my AD but they hit the the two little black things that hang down where the filter threads on to.
 
You must log in or register to reply here.
Back
Top