Rocker arm ratios

zstroken

zstroken

For $$$ your name here
Joined
Sep 27, 2006
Messages
23,151
I did a brief search and cam up with nill.

What are the rocker arm ratios for the 24V?

Are they different from CR to VP?
 
zstroken said:
I did a brief search and cam up with nill.

What are the rocker arm ratios for the 24V?

Are they different from CR to VP?
Click to expand...


I sure hope not. I've been interchanging them for years.LOL
 
Smokem said:
1.38 intake 1.34 exhaust
Click to expand...


That is what I thinking, but subtracting out the lash and dividing valve motion by cam lift from the card. I come up with 1.34 intake and 1.25 exhaust. I suppose I could measure the cam motion to verify that the cam was ground correctly. Also curious if there was a manufacturing variance among them.
 
Last edited:
GOT-Torque said:
make sure your hydraulic lifters are pumped up before measuring valve movement Dan...
Click to expand...


I cranked it over by hand enough times I would for sure thought they would have been pumped up to super duper horsepower capacity!
 
You must log in or register to reply here.
Back
Top