ridejad
New member
- Joined
- Feb 6, 2013
- Messages
- 93
S357, over s471, for 94-98 but could easily work on a first gen or a 24v, (both turbos are used but completely pulled apart sandblasted, and inspected and painted)all piping was made by myself and my partner comes with complete setup to bolt on and run minus putting an oil drain in the pan and welding 5in exhaust flange to existing exhaust, this setup would be awesome ~450 conservative hp or a nasty towing setup
items Included are
-s357 borg internally gated dual flapper as the top
-s471 borg 71/96/1.32
-custom v band cold pipe
- custom hot pipe- .5in t6 flange
- all silicon boots and ss clamps
-5in exhaust flange to weld up to existing exhaust system
-custom feed hydraulic lines rated for 2000psi
-silicon oil drain hose
-custom intercooler piping(2nd gen was our mockup so this might be slightly different)
- 4in intake tube to run air filter off of
-new t3 gasket
-new t6 gasket
$3500 shipped waiting on one clamp to arrive in the mail then itll be good to go
best to get ahold of me through call/text 248-978-2959
items Included are
-s357 borg internally gated dual flapper as the top
-s471 borg 71/96/1.32
-custom v band cold pipe
- custom hot pipe- .5in t6 flange
- all silicon boots and ss clamps
-5in exhaust flange to weld up to existing exhaust system
-custom feed hydraulic lines rated for 2000psi
-silicon oil drain hose
-custom intercooler piping(2nd gen was our mockup so this might be slightly different)
- 4in intake tube to run air filter off of
-new t3 gasket
-new t6 gasket
$3500 shipped waiting on one clamp to arrive in the mail then itll be good to go
best to get ahold of me through call/text 248-978-2959
