99_SilvrCummins
New member
- Joined
- Feb 5, 2009
- Messages
- 202
1.The measurements are 64/71/13. The exhaust housing is a stainless steel HTT housing. It is the common rail size exhaust outlet but I have a hx40 adaptor and the turbo is on my 99 currently. I have both the 2nd and 3rd gen compressor housings, both are polished. So this charger will fit 94-07 Dodge Cummins trucks. It has a spring style waste gate actuator and is a T3 foot.
I bought it used and only put around 1500 miles on it and am switching the truck setup around. Turbo was originally built by Engineered Diesel according to the previous owner. I also have a hx40 stainless down pipe for 100 more if sold with the turbo, I'd rather not ship this tho.
Asking 1500 obo with both housings and the stainless hx40 adaptor, not including shipping.
2. This charger is a 62/65/13ss t3 foot cr flange and comp housing. Canister style wastegate. Turbo was originally a bullseye charger rebuilt locally with no miles on the rebuild. Only thing I found wrong was one bolt for the wastegate tab is welded, could be ground off to run a spring gate or ran as is. Originally planned to run on my 07 but picked up a 63 I'd rather use. 1250 obo plus shipping.
Call text 58535094one4. Located in urbana, oh 43078
Only trade I'd consider would be a 62-63/68/xx second Gen charger for the secondary in compounds. These won't work with cr flanges the added adaptor thickness throws off the whole piping kit I have.
I bought it used and only put around 1500 miles on it and am switching the truck setup around. Turbo was originally built by Engineered Diesel according to the previous owner. I also have a hx40 stainless down pipe for 100 more if sold with the turbo, I'd rather not ship this tho.
Asking 1500 obo with both housings and the stainless hx40 adaptor, not including shipping.
2. This charger is a 62/65/13ss t3 foot cr flange and comp housing. Canister style wastegate. Turbo was originally a bullseye charger rebuilt locally with no miles on the rebuild. Only thing I found wrong was one bolt for the wastegate tab is welded, could be ground off to run a spring gate or ran as is. Originally planned to run on my 07 but picked up a 63 I'd rather use. 1250 obo plus shipping.
Call text 58535094one4. Located in urbana, oh 43078
Only trade I'd consider would be a 62-63/68/xx second Gen charger for the secondary in compounds. These won't work with cr flanges the added adaptor thickness throws off the whole piping kit I have.
Last edited:
