s400 169012

S

smokingdodge12v

New member
Joined
Oct 21, 2007
Messages
190
Can anyone tell by this part number what size s400 this is like wheel sizes and A/R exhaust housing. #169012 Thanks
 
smokingdodge12v said:
Can anyone tell by this part number what size s400 this is like wheel sizes and A/R exhaust housing. #169012 Thanks
Click to expand...

I saw one of those units at the local turbo shop. Its only like a 63mm unit and has a 83mm turbine. Non ETT though.....
 
Google tells me its a 1.10 a/r and they can be found for under $600 new. If you look at the SX series you can find some .90 t-4 housings =P
 
Any other info on this charger? Old technology....New?
Smaller than an S465? May work as a single on the street with a 0.90?
 
smokingdodge12v said:
Can anyone tell by this part number what size s400 this is like wheel sizes and A/R exhaust housing. #169012 Thanks
Click to expand...


Per my parts list:

compressor flow over 64 lb/min.

Compressor: 63.5 mm inducer, 91.4mm exducer. Turbine: 83.5mm inducer, 74mm exducer.

Compressor .63, with 5.0" hose-type inlet, and v-band-type discharge. Turbine: 1.10, with 'divided' volute, featuring 'T6-style' turbine inlet flange (4.438"x2.75"), and quick-release v-band discharge flange
 
97crewcab said:
Any other info on this charger? Old technology....New?
Smaller than an S465? May work as a single on the street with a 0.90?
Click to expand...

Looked at one this weekend to verify......non-extended tip. Oh well, but it appears to be a decent charger I guess.
 
turbo

i saw this p/n before and wrote it down and just found this post. but the p/n i have written is 169012-a. anyone tell me what the difference between the suffix "a" and without??
 
You must log in or register to reply here.
Top