s400 part number

G

gwhammy

Active member
Joined
Sep 14, 2006
Messages
2,203
S400SO57

I think I'm reading this right, this is a s400 with a 57 mm compressor wheel. It's on evilbay, a john deere part number. Anyone break this part number down.
 
no, your not reading it right. the part number is s400s057, and that nuber doesnt cross to compressor size. my s464 is s400s009
 
It looks like it's in the 50's if you look at the tape beside it. It's just a hair over 2 inches just putting the bad eye on it.
 
GOT-Torque said:
Sure doesn't look like an 80mm wheel, look at the pics. much smaller
Click to expand...

I didn't look at the pictures, just a quick example of a BW #, if you find a similar # I may be able to help, sorry for any confusion
 
71/88 1.32a/r

P/N: RE506836

Model: S400S057

OEM: 171960

Aftermarket: 177285

Applications: 00-08 John Deere 12.5L 6125H Engines
 
do you know the A/R of the comp housing?

appears to be a .66AR, slipfit hose discharge. hmmmm.....
 
Last edited:
Using the pic from ebay (and using paint to move his tape measure over a little) , it just looks to me like it's close to a 60mm wheel, not a 71?

What do you think?
 

Attachments

  • turbo.jpg
    turbo.jpg
    50.6 KB · Views: 49
CHUCKDIESEL said:
where did you get this info? im looking at a s400s-009 but cant get specs on it.
Click to expand...

thats the turbo i run.

High-flow S400 model, with compressor flow over 64 lb/min. Will service 600+HP.

Wheel Dimensions:
Compressor: 63.5 mm inducer, 91.4mm exducer.
Turbine: 83.5mm inducer, 74mm exducer.

Housing A/R:
Compressor .63, with 5.0" hose-type inlet, and 4.0" hose-type discharge.
Turbine: 1.10, with 'divided' volute, featuring 'T6-style' turbine inlet flange (4.438"x2.75"), and quick-release v-band discharge flange. Cast in ductile iron.
 
smokin24valve said:
:doh: I didn't even look, I saw an email and just replied.:lolly:

I wouldn't pay more than $500 for it
Click to expand...

i think mine was around $550 shipped from BW then another $200 for the .90 housing, and will be another $500 to get the ETT 68mm wheel and race cover put on.
 
You must log in or register to reply here.
Back
Top