s591 + extra exhaust housings

kleann

kleann

VP44 pwr
Joined
Aug 23, 2008
Messages
4,388
S500sx 91mm with a 0.85 exhaust housing. This turbo is like new, only has 4 hooks on it. I also have a never used 1.60 housing and a 1.0 housing we used one time. Those alone are $450 a piece. Ran it as a single but works well in a compound setup as well.
Asking $2850 and I don't want to use Paypal for this amount, need a check or money order.

Thanks
 

Attachments

  • IMG_3662.jpg
    IMG_3662.jpg
    44.9 KB · Views: 0
Just so people are aware...you can stuff a 104mm wheel in that compressor cover ;)
 
I had mine done to a 98mm..anyways, these s500's are awesome chargers! Good luck with the sale.

20150729_151635_zpsgo4oz35k.jpg
 
Last edited:
Back for sale. $2600 with the 0.85 housing. I'm going to keep the other housings. Pm me if interested.
 
Bump, any offers? Looks like these are going for a little less than last year when I bought it.
 
Need to sell this asap. Make me an offer on the turbo and one housing of your choice, or the turbo with all three housings.
 
It would probably be best to put an updated price -- I'd like to sell this all in one fell swoop. $2,675 shipped for the s591sx and three housings.
 
A few guys have pm'd me asking about that. It ran great, but due to choosing a subpar engine builder, the engine bent valves, and we didn't get to work it to it's potential. If you have a good head, cam, and fuel, it will make a lot of power as a single.
 
I have a 12v with a 550cc pump, and some 5x.016 injectors. Timing is at 22 degrees. Should it work as a single?
 
You must log in or register to reply here.
Top