BlackStroker
New member
- Joined
- Mar 28, 2007
- Messages
- 552
Putting my pump and injectors for sale, shipped from 61761, but prices do not include shipping.
Scheid built 13mm pump
Quick rate cam
Auto Gov
Haisley 5k Springs
Fully adjustable plate where AFC used to be
I have it set up to feed the front and side(stock) ports and returns out of the stock location. Have seen 5300rpm on the recall tach. I turned it down a bit from 550, to about 475. I don't have the pump card but i have pictures of it from the original purchaser. I ran it about 15-17 pulls this year and it had 6-8 passes on it from the original purchaser. I always ran Schafers Diesel Treat at 100 times the suggested rate(about i pint per two gallons of fuel). Its set up for standard oil feed. I can post pictures if so requested. Also ran with .093 lines if that matters, which are not for sale, unless someone offers good money for them.
$2750 no core needed.
Scheid 5x22 Injectors ran at the same time the 13mm was. Bought them through Haisley and I have a card for them but not with me tonight, I don't know if they are dual or single feed, I can call Scheid and find out. They were somewhere around $1k new.
$600 no cores/or $500 with good stock cores.
Video of setup in action, plus many others on my account from 2009.
YouTube - Matt Jones McLean County 2009
Scheid built 13mm pump
Quick rate cam
Auto Gov
Haisley 5k Springs
Fully adjustable plate where AFC used to be
I have it set up to feed the front and side(stock) ports and returns out of the stock location. Have seen 5300rpm on the recall tach. I turned it down a bit from 550, to about 475. I don't have the pump card but i have pictures of it from the original purchaser. I ran it about 15-17 pulls this year and it had 6-8 passes on it from the original purchaser. I always ran Schafers Diesel Treat at 100 times the suggested rate(about i pint per two gallons of fuel). Its set up for standard oil feed. I can post pictures if so requested. Also ran with .093 lines if that matters, which are not for sale, unless someone offers good money for them.
$2750 no core needed.
Scheid 5x22 Injectors ran at the same time the 13mm was. Bought them through Haisley and I have a card for them but not with me tonight, I don't know if they are dual or single feed, I can call Scheid and find out. They were somewhere around $1k new.
$600 no cores/or $500 with good stock cores.
Video of setup in action, plus many others on my account from 2009.
YouTube - Matt Jones McLean County 2009
Last edited:
