scheid 20000 and snow water kit

G

gotta12v

New member
Joined
Dec 6, 2006
Messages
435
Have a lightning 20000 and a snow water kit (I think its a stage 3 with in cab controller)

turbo has the 231 housing , hx40 discharge, t4 flange, 3.0 compressor comes with a removable 2.8 bushing. only a handfull of passes. decided to take the truck down to the 2.6 rules they adopted here in ky as we already have a competitive 2.8 truck running. over 2500 new from scheid would like 1800 but am open to offers.

snow kit is also like new , make offer on it, 2.6 does not allow water. would be a good kit for a street truck or a pulling truck that has an intercooler but needs a little extra temp reduction
 
bump
also dont be afraid to make offers and I have pictures I could email if somone will show me how
 
I was wrong on it being a stage 3 it is the stage 2 with the controller mounted in the cab. (little screws to adjust when the 2 stages come on bosst referenced) but I have no pics yet anyway.

may be open to trades on somthing pm offers.

also have a riverside engines regrind cam (riverside does alot of prostock john deere engines) requires flycuts specs available on request.
 
gotta12v said:
I was wrong on it being a stage 3 it is the stage 2 with the controller mounted in the cab. (little screws to adjust when the 2 stages come on bosst referenced) but I have no pics yet anyway.

may be open to trades on somthing pm offers.

also have a riverside engines regrind cam (riverside does alot of prostock john deere engines) requires flycuts specs available on request.
Click to expand...

cam will it work on a 01? pm me the spec please Rob
 
its on a 12v core but will work in a 24v. the card is at the shop ill get the specs sometime after the holidays and figure out how much clearence it needs for a 12v and 24v and let you know
 
Water Kit

Does the kit have everything to put it back on nozzles line and tank If so would you take 300.
 
You must log in or register to reply here.
Back
Top