Scratchin for traction

C

cummins04.5

New member
Joined
Jul 4, 2009
Messages
32
Hey guys, I an 04 dodge qc lb, Blocked the rear and traction bar to about the front of the back door of the truck. Running into problems with getting the power to the ground. Anybody doin anything different. Been scratchin my head on this for months now.:doh: Thanks in advance
 
What tires, what gear, what axles gears? Front weight bracket? Can you use a front bracket in your class.. looks like you have the HP..
 
JDGnut said:
What tires, what gear, what axles gears? Front weight bracket? Can you use a front bracket in your class.. looks like you have the HP..
Click to expand...

305\65\ 17 dick cepek crushers, 4th gear low range, 3.73, And no our class does not allow weight brackets.:bang Wish we could
 
Get some gym room weights and put them under your seat or something. Fill your bumper with lead, etc. But again do you have a front locker? That is probably the best traction enhancer of anything!
 
A front locker will help out alot. Also you may try 2nd gear high range, but just don't be shocked when the tranny lets go even on the first pass. Nothing else a taller tire will work too. I run 315/70-17's on my 04 dually in 4th low and I can tell a big difference in the way it hooks and ground speed.
 
I would say your biggest problem is the gear an gearing your not getting enough load on the motor to keep traction, like kino fab says I would try some bigger tires or 2nd hi.
 
You must log in or register to reply here.
Back
Top