Selling my mechanical injecton/12v parts

DieselheaD

DieselheaD

New member
Joined
Jun 25, 2007
Messages
2,731
13mm RQV pump by Seth Farrell
Fully rebuilt/resealed with Bosch barrels/plungers
2095 rack cap
5k springs
Scheid high flow delivery valves
Balanced governor weights
Afc modified for full travel
With full cuts it tested at 980cc with full cuts. Not sure what it will do now since I swapped dv after it was built.

$2500 no core

image_zps87pygg57.jpg


Scheid 106 lightning 101 BT25 345394

5x25 large sac injectors, triple feed,9mm nozzle


Purchased from Alan Kirscht, after he had sent them to be fully checked out by scheid. I've got less than 2 hours of run time on them

$1500 firm.

image_zpsprlkvvi2.jpg

image_zpsrrcpn1nx.jpg

image_zpsuslsco7q.jpg



Performance valve spring setup for 12v
Good for ~60-75 lbs boost/drive @ 5500rpm
.360/.360 lift cam

Manley Beehive shape, ovate wire.
Steel retainers
HD locks

$300

image_zpsbvr4kl3q.jpg





Smith Bros. HD pushrods

Std. Length .120 wall

$150


image_zps81ecgnl9.jpg





209-617-7072
 
Are any modifications needed to the cyl head to run these injectors?
 
jasonc said:
Are any modifications needed to the cyl head to run these injectors?
Click to expand...

Depends what cylinder head you have, early non-ic 12v had a 9mm injector bore, all the late 12v have a 7mm more. I made a guide with an extra injector hold down nut a did some math measuring on the 7mm nozzle and the 7mm bore to get the same clearance and drilled my head out myself to fit the 9mm nozzle correctly.
 
Few people interested in pump and injectors, still up for grabs. These things need to go
 
Last edited:
Going to be shipping valvespring package and pushrods out Monday, I'd like to have it all gone by then.

13mm pump $2500 shipped

Scheid triple feed 5/25 $1450 shipped


PayPal only. 209-617-7072
 
You must log in or register to reply here.
Back
Top